Bausch & Lomb Sensitive Eyes Saline Solution 500ml (A)

Sensitive Eyes Saline Solution (formerly Sensitive Eyes Plus Saline Solution), has a gentle, pH-balanced formula which contains potassium, an ingredient found in natural tears. Sensitive Eyes Saline Solution is never to be used for lens disinfection but can be used for rinsing soft contact lenses and rigid gas permeable contact lenses.

Bausch + Lomb Sensitive Eyes Saline Solution removes loosened debris and traces of daily cleaner when used as a rinse after cleaning. It can also be used to rinse lens cases and as a final (pre-inserting) lens rinse after chemical (not heat) and hydrogen peroxide disinfection.

Directions:

How to use Bausch & Lomb Sensitive Eyes Saline Solution:

• Rinsing After Cleaning
• Clean your lenses with a daily cleaner such as Bausch & Lomb Sensitive Eyes Daily Cleaner as instructed by your eye care practitioner.
• After cleaning, rinse lenses thoroughly with Bausch & Lomb Sensitive Eyes Saline Solution by holding the lens between the forefinger and thumb orplacing it in the palm of the hand. Direct a steady stream of saline onto the lensfor approximately 10 seconds.

Heat (Thermal) Disinfection

• Fill the chambers of your lens carrying case or Bausch & Lomb Compact Disinfecting Unit 2/3 full with fresh Bausch & Lomb Sensitive EyesSaline Solution.
• Place the cleaned lens into the correct chamber.
• Tightly close the cap of the chamber.
• Follow the operating instructions for the disinfecting unit.

Emergency (alternate) Method of Heat (thermal) Disinfection
If your heat disinfection unit is not available, place the tightly closed lens carrying case which contains saline and the lenses in a pan of boiling water for at least 10 minutes. (Above an altitude of 7,000 feet, boil for at least 15 minutes.) Be careful not to allow the water to boil away. Remove the pan from the heat and allow it to cool for 30 minutes to complete the disinfection of the lenses.

Warnings:

Warnings relating to Bausch & Lomb Sensitive Eyes Saline Solution:

• If you are allergic to any ingredient in Bausch & Lomb Sensitive EyesSaline Solution, do not use this product.
• Keep the bottle tightly closed when not in use.
• Store at room temperature.
• Use before the expiration date marked on the bottle and carton.
• Never re-use this solution.

Side effects relating to Bausch & Lomb Sensitive Eyes Saline Solution:
The following problems may occur: eyes sting, burn or itch (irritation), comfort is less than when lens was first placed on the eye, feeling of something in the eye (foreign body, scratched area), excessive watering (tearing) of the eye, unusual eye secretions, redness of the eye, reduced sharpness of vision (poor visual acuity), blurred vision, rainbows or halos around objects, sensitivity to light (photophobia), or dry eyes.

If you notice any of the above:

• Immediately remove your lenses.
• If the discomfort or problem stops, then look closely at the lens.
• If the lens is in any way damaged, do not put the lens back on your eye.
• Place the lens in the storage case and contact your eye care practitioner.
• If the lens has dirt, an eyelash, or other foreign body on it, or the problem stops and the lens appears undamaged, thoroughly clean, rinse, and disinfect the lens, then reinsert it.
• If the problem continues, immediatelyremove the lens and consult your eye care practitioner.
• If any of the above symptoms occurs, a serious condition such as infection, corneal ulcer, neovascularization or iritis may be present. Seek immediate professional identification of the problem and prompt treatment to avoid serious eye damage.

Ingredients:

Bausch & Lomb Sensitive Eyes Saline Solution contains:
Isotonic, buffered solution that contains Boric Acid, Sodium Borate and Sodium Chloride; preserved with Sorbic Acid (0.1%) and Edetate Disodium (0.025%).

⚠️ Safety information

Caution: Use only as directed. If irritation occurs discontinue use. As we are always looking to improve our products, our formulations change from time to time, so please always check the product packaging before use.